This colorless leather edge shine can be used to refine and seal leather edges.

After rounding the edges, for example with an edge plane, you can apply this edge shine for a beautiful finish.

Application:

• Shake well before use. Always close the container after application to prevent it from drying out.

• The applicator brush is located directly in the container (always store it there, otherwise it will harden).

• Lightly wipe the applicator brush (ball tip) against the container to remove excess liquid.

• Apply a thin layer of liquid to the edge. If any drops get onto the leather surface, wipe them away immediately (otherwise, they will be sealed and leave stains).

• Allow to dry (10-30 minutes, or speed up the process with a heat gun).

• Then smooth and rub with an edge polisher/rubbing block until the desired finish (gloss) is achieved.

• Alternatively:

• If certain more porous edges require more sealing, after the first drying, you can sand down the raised fibers with a fine sanding pad and then apply a second coat of edge polish.

• Afterward, without letting it dry, lightly wipe with a coarse linen/cotton cloth (for a matte sheen).

• If desired, you can rub again with an edge polisher for a glossier and finer finish.

Specifications:

• Dimensions: 42mm x 69mm

• Contents: 50ml